Flip-up Tile Front Service LED display/screen/sign/video wall/panel/billboard/signages/board

Front Removable Cabinet LED display/screen/sign/video wall/panel/billboard/signages/board


This is a simple system where access to the internal electronics is by removing an LED cabinet from the front. Servicing is then done through the hole left in the cabinet.
The cabinet is a standard design with the only difference being that the LED modules are mounted from the front and not from the inside.
Because screws are used from the front the minimum pitch possible with this system is limited.  minimum pitch for this front service is 16mm

Safety chains can be attached to cabinet inside
Minimum space needed behind cabinet, only enough for structure, cables & ventilation
Structure can be slim & light saving cost and installation time
No limit to screen size
Lowest cost front service system


Flip-up Tile Front Service LED display/screen/sign/video wall/panel/billboard/signages/board

The flip-up module method employs a hinged LED front face which lifts up for servicing and larger cabinets are possible than for the pop-up system.
Safety chains are attached inside cabinets to support it when it is open up
Structure can be slim & light saving cost and installation time
Minimum space needed behind cabinet, only enough for structure & ventilation
Cables can be routed internally


Pop-up Tile Front Service LED display/screen/sign/video wall/panel/billboard/signages/board



The pop-up cabinet method employs a hinged LED front face which can be released by first removing two masks and then releasing locks using a special key.
Safety chains can be attached to LED cabinets inside
Minimum space needed behind cabinet, only enough for structure & ventilation
Cables can be routed internally
Structure can be slim & light saving cost and installation time
Any screen size is possible as hinge system permits cabinet stacking
Keys are matched to pins to flip up the cabinet, great conveniences to open up it